Vikas Castings - Products - C. I. Duplex Mould

Products > C.I. Duplex Ingot Mould | C.I. Ingot Mould | C.I. Fluted/Corrugated | C.I. Slab Mould | C.I. Slag Pot | C.I. Centre Column | C.I. Bottom Plate

Ingots

Bottom Plate

Centre Column

Slag Pot

At Vikas Castings products are tailor made therefore needs careful production planning. In the process of manufacturing ingot moulds we use DRY SAND MOULDING PROCESS. We have our own in house PATTERN shop catering to our various clients specifications.

This process has gained popularity based on the superior quality of the castings produced. And, more important is the fact that, the cost of a finished component produced by the casting process is less than or comparable to that of the conventional production techniques.

Our product range consits of the following:

2 x 3 x 52”
2 x 3 x 54”
2.25 x 3.25 x 54”
2.5 x 3.5 x 54”
2.5 x 3.5 x 60”
3 x 4 x 54”
3 x 4 x 60”

3.25 x 4.25 x 48”
3.25 x 4.25 x 54”
3.25 x 4.25 x 60”
3.5 x 4.5 x 54”
3.5 x 4.5 x 60”
4 x 5 x 54” (side Lug)
4 x 5 x 54”

4 x 5 x 60”
4.25 x 5.25 x 58”
4.25 x 5.25 x 60”
4.25 x 5.25 x 62”
4.5 x 5.5 x 54”
4.5 x 5.5 x 60”
5 x 6 x 54”

5 x 6 x 60” (side Lug)
5.5 x 6.5 x 36”
5.5 x 6.5 x 54”
6 x 7 x 50”
6.5 x 7.5 x 50”

	+ 91 33 2661 7676 / 2651 8006
	+ 91 33 2661 7675 / 2651 6435
	NH-6, Jaladhulagori, Sankrail Industrial Park, P.S. - Sankrail Howrah - 711302, West Bengal, India

	Mr. Shivam Madhogaria - Director
	+91 9903965617
	shivam@vikascastings.com / info@vikascastings.com

© 2018 Vikas Castings, All Right Reserved.