|
 |
|
|
At Vikas Castings products are tailor made therefore needs careful production planning. In the process of manufacturing ingot moulds we use DRY SAND MOULDING PROCESS. We have our own in house PATTERN shop catering to our various clients specifications.
This process has gained popularity based on the superior quality of the castings produced. And, more important is the fact that, the cost of a finished component produced by the casting process is less than or comparable to that of the conventional production techniques.
Our product range consits of the following:
Slab A (Duplex) - 7 x 3.5/8 x 4.5 x 48”
Slab B1 (Duplex) - 9 x 3.5/8 x 4.5 x 48”
Slab B2 (Single) - 10.5 x 4.5/9.5 x 3.5 x 48”
Slab B2 (Spl) - 10 x 3.5/11 x 4.5 x 48”
Slab B2 (Duplex) - 10.5 x 4.5/9.5 x 3.5 x 48”
Slab C (Single) - 12 x 6/10 x 5 x 48”
|
|
Slab C1 (Singlet) - 14 x 6/13 x 5 x 48”
Slab C1 (Single) - 12 x 6/11 x 5 x 48”
Slab E (Single) - 16 x 8.5/13 x 6.5 x 53”
Slab E (Spl) - 16.15 x 5.30/15.15 x 4.30 x 48”
Slab G (Single) - 21 x 10/19 x 8 x 54”
Slab BMN (Single) - 24 x 14/22 x 12 x 54”
|
|
