At Vikas Castings products are tailor made therefore needs careful production planning. In the process of manufacturing ingot moulds we use DRY SAND MOULDING PROCESS. We have our own in house PATTERN shop catering to our various clients specifications.
This process has gained popularity based on the superior quality of the castings produced. And, more important is the fact that, the cost of a finished component produced by the casting process is less than or comparable to that of the conventional production techniques.
Our product range consits of the following:
13.5 x 16.5 x 62” (419mm)
17 x 19 x 72” (522mm)
19 x 21 x 65” (522mm)
21 x 23 x 65” (572mm)
23 x 26 x 65” (715mm)
|
 |
12 x 15 x 53”(M-1 Hexagonal Plug)
14 x 17 x 53” (M-1.5 – Plug)
16 x 17 x 58” (M-2 – Plug Corr)
19 x 21 x 57” (M-2.5 – Plug Corr)
24 x 28 x 48” (BSO BF Polygonal)
|
|
21 x 24 x 62” (M-3 – BSO Polygonal)
28 x 32 x 58” (M-4 BSO 6F Polygonal)
28 x 31 x 58.7” (M-5 BSO 12F Polygonal)
28 x 32 x 59” (M-6 BSO 12F Polygonal)
804 x 977 x 1860mm (M-9 BSO 12F)
|
|
22 x 24 x 65” (BSO – Corrugated)
23 x 26 x 70” (BSO – Corrugated)
19 x 22 x 56” (BSO – Corrugated)
16 x 19 x 62” (BSO – Corrugated) |
| N.B.: Plug type, Non-Plug type, Fluted / Corrugated Mould of any sizes are also available. |
|
